Sanyo PLC-XL50 Betriebsanweisung

AC power cord must meet the requirements of the country where you use the projector.

Confirm the AC plug type with the chart below and proper AC power cord must be used.

If the supplied AC power cord does not match your AC outlet, contact your sales dealer.

To power cord 
connector on your 
projector.

Ground

To the AC outlet.

This projector uses nominal input voltages of 100–120 V or 

200–240 V AC and it automatically selects the correct input 

voltage. It is designed to work with single-phase power 

systems having a grounded neutral conductor. To reduce the 

risk of electrical shock, do not plug into any other type of 

power system.

If you are not sure of the type of power being supplied, 

consult your authorized dealer or service station.

Connect the projector with all peripheral equipment before 

turning it on.

Connect the AC power cord (supplied) to the 
projector.

To the AC outlet.

To the AC outlet.

 

The AC outlet must be near this equipment and must be easily 

accessible.

✔