Sanyo PLC-XL50 Betriebsanweisung

Adjust the lens focus with the focus lever.

Focus Lever

•The arrows are white when there is no correction.
•The direction of the arrow which are being corrected  

turns red.

•The arrows disappear at the maximum correction.
•If you press the KEYSTONE button on the top control 

or on the remote control once more while the 
keystone dialog box is being displayed, the keystone 
adjustment is canceled.

•The adjustable range can be limited depending on the 

input signal.

•The projected picture may fluctuate momently 

depending on the keystone adjustment.

•“Keystone” disappears after 4 seconds.

If a projected picture has keystone distortion, correct the 

image with the Keystone function.

Press the KEYSTONE button on the top control or on the 

remote control. 

 The keystone dialog box appears.  Correct 

keystone distortion with the Point 

ed

 buttons.  Keystone 

adjustment can be stored (p.45).

Reduce the upper width 
with the Point 

e

 button. 

Reduce the lower width 
with the Point 

d

 button.  

POINT ed buttons

POINT ed buttons

Press the ZOOM +/- buttons on the top control to adjust the 

screen size. Screen size can be adjusted 84% to 100% from 

its maximum screen size.

It is not available when On-Screen menu is displayed.

Zoom adjustment can be memorized. (p.45)

Screen position can be adjusted in the Zoom Adjustment.

Press the ZOOM+ or ZOOM- buttons on the top 

control.

 While ZOOM+ or ZOOM- is displayed on the screen, 

press the SELECT button. Arrow marks displayed on 

the screen.

Press the point ed7 8 buttons to adjust screen 

positions.

Screen position can not be adjusted at ZOOM maximum.