Linksys RV082 Installationsanweisungen

F

1

dynamic IP address from your 

ISP, then select Obtain an IP 

automatically as the WAN 

Connection Type. If you also 

select Use the Following DNS 

Server Addresses, enter a spe-

cific DNS Server IP Address.

b

Click the Save Settings button, 

and go to Step G.

a

If your ISP says that you are 

connecting through a static or 

fixed IP address from your ISP, 

then select Static IP as the WAN 

Connection Type.

b

Enter the WAN IP Address, Sub-

net Mask Default Gateway 

Address, and DNS Server pro-

vided by your ISP.

c

In the DNS Server fields, enter 

the DNS address(es) provided 

by your ISP. You need to enter 

at least one DNS address.

d

Click the Save Settings button, 

and go to Step G.

a

If your ISP says that you are 

connecting through PPPoE or if 

you normally enter a user 

name and password to access 

tinue with the instruction, 

below, to complete the Net-

work page.

D

Depending on the setup infor-

mation from your ISP, you may 

need to provide a host name 

and domain name for the 

Router. The Host Name and 

Domain Name fields are usu-

ally left blank. If requested by 

your ISP (usually cable ISPs), 

complete these two fields.

E

Choose the function of the 

DMZ/Internet (WAN2) port. If the 

port will be used as a second 

Internet port, select Dual WAN. 

If the port will be used as a 

DMZ port, select DMZ.

F

In the drop-down menus for 

WAN1 and WAN2, the WAN 

Connection Type setting fea-

tures four Internet connection 

types: obtain an IP automati-

cally, Static IP, PPPoE, and PPTP. 

Depending on which connec-

tion type you select, the fea-

tures available on the Network 

page of the Setup screen will 

differ. Proceed to the instruc-

tions for the connection type 

you are using.

a

If your ISP says that you are 

connecting through DHCP or a 

H

Power your cable or DSL 

modem off and back on 

again.

I

Restart or power on your PCs so 

they can obtain the Router’s 

new settings.

J

To test the Router’s settings, 

open your web browser from 

any computer. In the browser’s 

Address field, enter 

www.linksys.com/registration 

and press the Enter key.

Congratulations! The installation of 

the Router is complete.

the Internet, then select PPPoE 

as the WAN Connection Type.

b

Enter the User Name and Pass-

word provided by your ISP.

c

If you select Connect on 

Demand, the PPPoE connec-

tion will be disconnected if it 

has been idle for a period 

longer than the Max Idle Time 

setting. 

d

If you select Keep Alive, the 

Router will keep the connec-

tion alive by sending out a few 

data packets at the Redial 

Period, so your Internet service 

thinks that the connection is still 

active.

e

Click the Save Settings button. 

f

Go to Step G.

PPTP is a service used in Europe and 

Israel only. IF you are using a PPTP 

connection, check with your ISP for 

the necessary setup information. 

When you are finished, go to Step G.

G

If you haven’t already done so, 

click the Save Settings button. 

Then, close the web browser.

RV082-QI-30924NC BW

For additional information or troubleshooting 
help, refer to the User Guide on the Setup CD-
ROM. You can also call or e-mail for further 
support.

800-326-7114 
(toll-free from US or Canada)

support@linksys.com

http://www.linksys.com   or

http://support.linksys.com

http://www.linksys.com/support

ftp://ftp.linksys.com

800-546-5797 (800-LINKSYS)

Linksys is a registered trademark or trademark of 
Cisco Systems, Inc. and/or its affiliates in the U.S. 
and certain other countries. Copyright © 2003 
Cisco Systems, Inc. All rights reserved.

Model No.

F

2

F

3

F

4

J

D