Lexmark X952dte Betriebsanweisung
C
HECK
THE
PAPER
TYPE
AND
WEIGHT
SETTINGS
Make sure the paper type and weight settings match the paper loaded in the tray or feeder:
1
From the printer control panel Paper menu, check the Paper Type and Paper Weight settings. Change the Paper
Weight setting from Normal to Heavy.
Weight setting from Normal to Heavy.
2
Before sending the print job, specify the correct paper type setting:
•
For Windows users, specify the paper type from Print Properties.
•
For Macintosh users, specify the paper type from the Print dialog.
C
HECK
THE
PAPER
TEXTURE
SETTING
From the printer control panel Paper menu, make sure the Paper Texture setting matches the paper loaded in the
tray or feeder. If necessary, change the Paper Texture setting from Normal to Rough.
tray or feeder. If necessary, change the Paper Texture setting from Normal to Rough.
M
AKE
SURE
THE
FUSER
IS
NOT
WORN
OR
DEFECTIVE
Replace the worn or defective fuser. For more information, see the instruction sheet that came with the replacement
part.
part.
Toner specks
Try one or more of the following:
M
AKE
SURE
THERE
IS
NO
DEFECTIVE
TONER
CARTRIDGE
Replace the defective or worn cartridges.
M
AKE
SURE
THE
PHOTOCONDUCTOR
UNIT
IS
NOT
DEFECTIVE
Replace the defective photoconductor unit.
C
ALL
CUSTOMER
SUPPORT
Transparency print quality is poor
Try one or more of the following:
C
HECK
THE
TRANSPARENCIES
Use only transparencies that meet the printer specifications.
Troubleshooting
342