Lorex sg620r Merkblatt

Seite von 2
Power Source: 
DC 3V ( 2 “C” batteries)
Alkaline Battery Life:
About 4 months
Weight (without batteries)
0.60 lbs / 0.27 kg
Weight (with batteries)
0.95 lbs / 0.45 kg
Dimensions
5.2“ x  5.2”x ” x 3.9”
(W x H x D )
132mm x 132mm x 100mm 
SPECIFICATIONS
INSTALLING THE SIMULATED (DUMMY) SECURITY CAMERA
1. Installing the Wall Mount Bracket: 
• Using the mounting base plate as a template, use a pencil to mark the position 
of the three (3) screw holes on the mounting location.
• Drill 1 inch holes in the marked positions.
• If necessary, insert the supplied drywall anchors into the screw holes
• Insert a 1 inch screw (provided) through each of the three (3) screw holes in 
the mounting base plate and into the mounting surface, then tighten the screws.
2.  Position the camera onto the base plate using the two (2) silver screws as a 
guide. Twist the dome camera onto the base plate to secure in place.
Ceiling / Wall
Camera
2.
1.
CAMERA CARE: 
Keep the simulated security camera dry. If it gets wet wipe it dry immediately. 
Use and store the simulated security camera only in normal temperature 
environments. Handle the simulated security camera carefully; do not drop it. 
Keep the simulated security camera away from dust and dirt, and wipe it with 
a damp cloth occasionally to keep it looking new
Modifying or tampering with the simulated security camera’s internal 
components can cause a malfunction and might invalidate its warranty
BATTERIES:
Warning: Dispose of old batteries properly. Do not burn or bury them.
Caution: If you do not plan to use the simulated security camera with batteries 
for a month or more, remove the batteries. Batteries can leak chemicals that 
can destroy electronics parts