Alcatel-Lucent 6850-48 Verweisanleitung
Network Time Protocol Commands
page 5-14
OmniSwitch CLI Reference Guide
September 2009
ntp authenticate
Enables or disables the authentication on a configured NTP server.
ntp authenticate {enable | disable}
Syntax Definitions
enable
Enables authentication for NTP server.
disable Disables authentication for NTP server.
Defaults
By default, NTP authentication is disabled.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• Use this command to enable or disable authentication for NTP server.
• Before NTP authentication is enabled, NTP operation should be enabled by using
command.
• Before enabling the NTP operation, NTP server must be specified using the
Examples
-> ntp authenticate enable
-> ntp authenticate disable
Release History
Release 6.4.2; command was introduced.
Related Commands
MIB Objects
alaNtpAuthenticate
Displays the information about the current NTP status.