Alcatel-Lucent ls 6248 Betriebsanweisung
VLAN Commands
667
4
- group — Group number of group of protocols associated together.
(Range: 1 – 2147483647)
- encapsulation — Currently the protocol “ethernet” is supported. If no option
is indicated the default is “ethernet”.
Default Setting
There are no default settings for this command.
Command Mode
VLAN Configuration mode
Command Usage
The following protocol names are reserved for Ethernet Encapsulation:
- ip-arp
- ipx
- ip
- ipx
- ip
Example
The following example maps a protocol 0x0000 to protocol group 1000 for Ethernet
port 1/e16 .
port 1/e16 .
Related Commands
switchport general map protocols-group vlan
The
switchport general map protocols-group vlan
classification-rules interface
configuration command sets a protocol-based classification rule. Use the
no
form of
this command to delete a classification.
Syntax
switchport general map protocols-group
group
vlan
vlan-id
no switchport general map protocols-group
group
Parameters
- group — Group number as defined in the map protocol to protocols-group.
(Range: 1 - 65535)
- vlan-id — Define the VLAN ID in the classifying rule.
Default Setting
There are no default settings for this command.
Console(config-vlan)# map protocol 0x000 ethernet protocols-group 1000
Console(config-if)# switchport mode
Console(config-if)# switchport mode
access