Franklin b-1100 Betriebsanweisung
14
Changing Settings
You can change the screen display, memory, key tone, shutoff , startup screen,
and speech of the unit. The shutoff time is how long your product stays on if you
forget to turn it off. To change the display for the unit, follow these steps.
1. From the Miscellaneous menu, press
and speech of the unit. The shutoff time is how long your product stays on if you
forget to turn it off. To change the display for the unit, follow these steps.
1. From the Miscellaneous menu, press
3 for Setup.
Or use the arrow keys to highlight
Setup and press
ENTER
.
2. Use the arrow keys to highlight the option you want and press
ENTER
. For
example, highlight
Display and press
ENTER
.
The display settings appear. You can change the contrast, language, or
Chinese font (simplified or traditional).
Chinese font (simplified or traditional).
3. Use the arrow keys to highlight the option you want and press
ENTER
. For
example, press to highlight
Language and press
ENTER
.
The language settings appear.
4. Use the arrow keys to highlight the option you want and press
ENTER
. For
example, highlight
English and press
ENTER
.
Your changes are automatically saved. For example, the message language
for the entire unit immediately changes.
for the entire unit immediately changes.
The unit returns to the display settings.
5. Press
(CLEAR)
when done.
Setting a Password
You can set a password to protect the information in the databank.
1. From the Miscellaneous menu, press
1. From the Miscellaneous menu, press
4 for Password.
Or use the arrow keys to highlight
Password and press
ENTER
.
2. Press
1 for Lock.
Or use the arrow keys to highlight
Lock and press
ENTER
.
3. Type a password and press
ENTER
.
Your password must be no more than eight English letters or numbers. As you
type the password, an asterisk (*) appears in place of each character. When
you press
type the password, an asterisk (*) appears in place of each character. When
you press
ENTER
, the unit prompts you to confirm the password.
4. Type the password again and press
ENTER
.
If the password was set successfully, the message
Lock completed! appears.
The unit returns to the previous screen. After you set a password, any
information you enter is protected. You can browse the databank only by
entering the correct password.
information you enter is protected. You can browse the databank only by
entering the correct password.
If the password was not set, the message
Wrong password! appears. Try to
enter the correct password or press
(CLEAR) to back out of the password
screen and start again.
5. Press
(CLEAR)
when done.
Using the Miscellaneous Menu