Franklin dmq-440n Betriebsanweisung
4
BOOKMAN model 440 uses two
CR2032 batteries. Here is how to in-
stall or replace them. Warning: When
the batteries lose power or are re-
moved from BOOKMAN, information
that you entered in its built-in book, and
in an installed book card, will be erased.
1. Turn BOOKMAN over.
2. Slide off its battery cover in
CR2032 batteries. Here is how to in-
stall or replace them. Warning: When
the batteries lose power or are re-
moved from BOOKMAN, information
that you entered in its built-in book, and
in an installed book card, will be erased.
1. Turn BOOKMAN over.
2. Slide off its battery cover in
the direction of the triangle.
3. Install the batteries with
their plus signs facing you.
4. Replace the battery cover.
Warning: Never install or remove a
book card when BOOKMAN is on. If
you do, information that you entered
in its built-in book, and in an installed
book card, will be erased.
book card when BOOKMAN is on. If
you do, information that you entered
in its built-in book, and in an installed
book card, will be erased.
1. Turn BOOKMAN off.
2. Turn BOOKMAN over.
3. Align the tabs on the book
2. Turn BOOKMAN over.
3. Align the tabs on the book
card with the notches in the
slot.
slot.
4. Press the card down until it
snaps into place.
Installing Cards
Installing Batteries
➤ Battery Information
1. Different types of batteries
1. Different types of batteries
or new and used batteries
are not to be mixed.
are not to be mixed.
2. Only batteries of the same or
equivalent type as recom-
mended are to be used.
mended are to be used.
3. Batteries are to be inserted
with the correct polarity.
4. Exhausted batteries should
be removed.
5. Supply terminals are not to
be short-circuited.
➤ Removing Cards
Warning: When you remove a
card to install another, information
that you entered into the removed
card will be erased.
card to install another, information
that you entered into the removed
card will be erased.