Franklin ic-101 Benutzerhandbuch
30
Installing Digital Books
NOTE: Your Digital Book System will operate only
when one or two digital books are installed.
when one or two digital books are installed.
1.
Turn the Digital Book System
off
.
1. Align the digital book’s tabs with the
notches in either book slot on the back of
the Digital Book System.
the Digital Book System.
If you install only one digital book, it doesn’t matter
which slot you use. But make sure that the digital
book’s metal contacts are facing down.
which slot you use. But make sure that the digital
book’s metal contacts are facing down.
2. Gently snap the digital book into the slot.
Removing Digital Books
1.
Turn the Digital Book System off
.
WARNING If you install or remove digital
books while the Digital Book System is on,
you may erase information that you entered
in them.
books while the Digital Book System is on,
you may erase information that you entered
in them.
2. Using your fingernail, compress the digital
book’s tab while lifting it from the slot.
Appendixes