Turtle Beach ak-r8 Betriebsanweisung
www.Turtle-Beach.com
Page 16
Connecting the AK-R8 Headphones
Plug the headphone connector into the SRM. Be careful to align the pins properly and don’t force it
in.
The headphone mic is removable, so it won’t get in your way if you don’t need it. To
adjust the mic level, open the SRM control panel and click on the Mixer Tab. Then click on
the mic mute button to un-mute the mic and adjust the mic volume slider. If it isn’t loud
enough, click on the (…) button next to the mute button and turn on the mic boost.
When the headphone microphone is inserted, the SRM’s internal microphones are
automatically disconnected, so that the voice from the headphone mic will be heard without
also hearing the ambient sounds picked up by SRM’s internal microphones.
in.
The headphone mic is removable, so it won’t get in your way if you don’t need it. To
adjust the mic level, open the SRM control panel and click on the Mixer Tab. Then click on
the mic mute button to un-mute the mic and adjust the mic volume slider. If it isn’t loud
enough, click on the (…) button next to the mute button and turn on the mic boost.
When the headphone microphone is inserted, the SRM’s internal microphones are
automatically disconnected, so that the voice from the headphone mic will be heard without
also hearing the ambient sounds picked up by SRM’s internal microphones.
Using Stereo Speakers or Stereo Headphones with the AK-R8 Headphones
You can connect powered stereo speakers to the SRM Line Output jack and use them with
the AK-R8 Headphones. When using the stereo speakers, set the Speaker Configuration in
the SRM Control Panel Speaker Tab to “2 Speakers”. You can also use stereo headphones
by inserting them into the Headphones jack. While listening with stereo headphones you can
mute the speakers on the line output by clicking the mute button next to the front channel
speaker volume controls in the SRM Control Panel Speaker Tab. Pressing SRM’s external
volume/mute control, or clicking on the mute button below the Master Volume slider in the
Speakers Tab, allows you to quickly mute all of the speakers and headphones.
the AK-R8 Headphones. When using the stereo speakers, set the Speaker Configuration in
the SRM Control Panel Speaker Tab to “2 Speakers”. You can also use stereo headphones
by inserting them into the Headphones jack. While listening with stereo headphones you can
mute the speakers on the line output by clicking the mute button next to the front channel
speaker volume controls in the SRM Control Panel Speaker Tab. Pressing SRM’s external
volume/mute control, or clicking on the mute button below the Master Volume slider in the
Speakers Tab, allows you to quickly mute all of the speakers and headphones.