Franklin ic-157 Benutzerhandbuch
12
Using the Digital Book System
Replacing the Batteries
The DBS-1 and DBS-2 use four 3-volt, CR2032 lithium
batteries. The DBS-2D uses four 1.5-volt, AA batteries.
batteries. The DBS-2D uses four 1.5-volt, AA batteries.
1. Have new batteries on hand.
2. Turn the Digital Book System off.
3. Slide the battery cover off the back.
4. Remove all the batteries.
5. Place new batteries in the cavities,
with their pluses oriented correctly.
In the DBS-1 and DBS-2 the pluses should face you.
6. Replace the battery cover.
✓
Battery Precautions
When you replace batteries, follow these precau-
tions to avoid erasing information in any installed
digital books.
tions to avoid erasing information in any installed
digital books.
• Replace the batteries before they lose all power.
• Never remove the batteries while the Digital Book
System is on.
System is on.
• Once the batteries have been removed,
install new ones within two minutes.
install new ones within two minutes.
• Never mix old and new batteries.
▼