Franklin mwd-460 Betriebsanweisung
Getting Started
Gently pull the battery insulation tab to remove it. Use a thin pointed object to press the reset button
on the back of the device.
on the back of the device.
Replacing Batteries
Your MWD-460 is powered by two CR-2032, 3-volt batteries. Follow these instructions to replace them.
Warning! When changing the batteries, please remove and replace one battery at a time. If you
remove both batteries at once, you may lose any information you entered.
Warning!! If the batteries wear out completely any user-entered information will be erased. You
should always keep written copies of your important information.
Warning! When changing the batteries, please remove and replace one battery at a time. If you
remove both batteries at once, you may lose any information you entered.
Warning!! If the batteries wear out completely any user-entered information will be erased. You
should always keep written copies of your important information.
1.
Turn the unit off and turn it over.
2.
Gently push down on the tab under the battery cover and flip the unit to allow the cover to
drop out.
Do not force the cover. Use a paper clip, if necessary, to remove the old batteries.
drop out.
Do not force the cover. Use a paper clip, if necessary, to remove the old batteries.
CR2032
+3V
CR2032
+3V