Franklin mws-3053 Betriebsanweisung
16
Cartridge Care
• Do not touch the metal contacts
on the cartridges.
Caution: Touching these electrical
contacts with statically charged
objects, including your fingers, could
erase information entered in a book
card or built-in book.
Caution: Touching these electrical
contacts with statically charged
objects, including your fingers, could
erase information entered in a book
card or built-in book.
• Do not put excessive pressure on
the cartridges.
• Do not expose the cartridges to
heat, cold, or liquids.
LBS.
If the BOOKMAN keyboard fails to
respond, or if its screen performs
erratically, first press CLEAR and then
press ON/OFF twice. If nothing
happens, follow the steps below to
reset it.
respond, or if its screen performs
erratically, first press CLEAR and then
press ON/OFF twice. If nothing
happens, follow the steps below to
reset it.
Warning: Pressing the reset button
with more then very light pressure
may permanently disable your
BOOKMAN. In addition, resetting
BOOKMAN erases settings and
information entered into its built-in
book, and in an installed book card.
with more then very light pressure
may permanently disable your
BOOKMAN. In addition, resetting
BOOKMAN erases settings and
information entered into its built-in
book, and in an installed book card.
1. Hold CLEAR and press ON/OFF.
If nothing happens, try Step 2.
2. Use a paperclip to gently press
BOOKMAN’s reset button.
The reset button is recessed in a pin-
sized hole on the back of BOOKMAN.
Look for it on the battery cover or near
the book card slot.
sized hole on the back of BOOKMAN.
Look for it on the battery cover or near
the book card slot.
➤
Troubleshooting BOOKMAN
• Make sure your book card, if
any, is installed correctly.
• Check that the book card’s metal
contacts are dirt-and dust-free.
Resetting BOOKMAN
MWS-3053.qx 12/1/04 10:58 AM Page 16