Franklin mwd-440 Betriebsanweisung
4
BOOKMAN model 440 uses two
CR2032, 3-volt batteries. Here is how
to install or replace them.
Warning: When the batteries lose
power or are removed from BOOK-
MAN, information that you entered in
its built-in book, and in an installed car-
tridge, will be erased.
CR2032, 3-volt batteries. Here is how
to install or replace them.
Warning: When the batteries lose
power or are removed from BOOK-
MAN, information that you entered in
its built-in book, and in an installed car-
tridge, will be erased.
1. Turn BOOKMAN over.
2. Slide off its battery cover in
2. Slide off its battery cover in
the direction of the triangle.
3. Install the batteries with their
plus signs facing you.
4. Replace the battery cover.
Warning: Never install or remove a
cartridge when BOOKMAN is on. If
you do, information that you entered
in its built-in book, and in an installed
cartridge, will be erased.
cartridge when BOOKMAN is on. If
you do, information that you entered
in its built-in book, and in an installed
cartridge, will be erased.
1. Turn BOOKMAN off.
2. Turn BOOKMAN over.
3. Align the tabs on the car-
2. Turn BOOKMAN over.
3. Align the tabs on the car-
tridge with the notches in
the slot.
the slot.
4. Press the cartridge down
until it snaps into place.
Installing Cartridges
Installing Batteries
➤ Removing Cartridges
Warning: When you remove a
cartridge to install another, informa-
tion that you entered into the
removed cartridge will be erased.
cartridge to install another, informa-
tion that you entered into the
removed cartridge will be erased.
➤ Resuming Where You Left Off
You can turn off BOOKMAN at
any screen. When you turn
BOOKMAN on again, the screen
that you last viewed appears.
any screen. When you turn
BOOKMAN on again, the screen
that you last viewed appears.