Franklin wp5600 Betriebsanweisung
11
10
Contrast Adjustment
1. After resetting, the contrast
adjustment display will appear.
2. You can use either or
to adjust the contrast of the display
Level 1 to Level 16.
(Initial setting = 8)
Level 1 to Level 16.
(Initial setting = 8)
3 Press to finish.
The display will enter the Spellchecker mode.
* If you want to adjust the contrast of the display again, press .
Select “LCD Contrast” by using or .
( See page 83. )
( See page 83. )
Preparation for using the Unit
Resetting
Before using the unit, remove the
battery insulation sheet from the unit
first, and then press the “RESET”
button on the front of the unit.
battery insulation sheet from the unit
first, and then press the “RESET”
button on the front of the unit.
At the shipping of the unit, the battery
insulation sheet is always set to the
battery.
insulation sheet is always set to the
battery.
The contrast adjustment display will
appear. ( See page 11. )
appear. ( See page 11. )
ALWAYS press the “RESET” button on the front of the unit after
battery replacement or if the unit fails to operate properly.
battery replacement or if the unit fails to operate properly.
NOTE: Pressing the “RESET” button will clear the EZ-Learn
Memory.
*
RESET