Fujitsu dl-3750 Benutzerhandbuch

USING SETUP MODE

User's Manual

5-27

Repeatedly press the LOAD button or the LF/FF button to position

the cursor under the emulation you require.  Then do either of the

following:

•

Press the MENU button to select the emulation and print the next

MENU1 or MENU2 item.  (As shown in Table 5.3, this is the

<FONT> item).

•

Press the TEAR OFF button to select the emulation and print

<==END==>.  Press the TEAR OFF button again to print the last

MENU1 or MENU2 item.  (As shown in Table 5.3, this is the

<RGHTEND> item).  The TEAR OFF button is convenient when

the options you need to change are near the end of the list of

items.

To change the options assigned to MENU1 or MENU2, make sure that

continuous forms paper is loaded and then proceed as follows:

Place the printer offline. Press the TEAR OFF button and the

ONLINE button simultaneously until the printer beeps.  Wait for the

printer to stop printing.  The following <<FUNCTION>> menu is

printed:

<<FUNCTION>>

  SAVE&END  MENU1  MENU2  HARDWRE  ADJUST  CONFIG  DEFAULT  LIST  SELF-TST  HEX-DUMP

  V-ALMNT

Repeatedly press the LOAD button or the LF/FF button to position

the red cursor under either the MENU1 or MENU2 function.  Press

the TEAR OFF button or the MENU button to select the function and

print the following <EMULATE> options:

<EMULATE>      DPL24C+   XL24E    ESC/P2