Fujitsu dl-3750 Benutzerhandbuch

USING SETUP MODE

User's Manual

5-34

To change the printer’s hardware options, make sure that continuous forms

are loaded and then proceed as follows:

Press the TEAR OFF button and the ONLINE button simultaneously

until the printer beeps.  Wait for the printer to stop printing and

check that the following <<FUNCTION>> menu is printed:

Repeatedly press the LOAD button or the LF/FF button to position

the red cursor under HARDWRE.  Press the MENU button to select

the HARDWRE function and print the first item and its options, as

shown below:

Press the LOAD button or the LF/FF button to move the cursor to the

option you require.  Press the MENU button to select the option and

print the next item.

Press the ONLINE button to exit the HARDWRE function and

reprint the <<FUNCTION>> menu.

<<FUNCTION>>

  SAVE&END  MENU1  MENU2  HARDWRE  ADJUST  CONFIG  DEFAULT  LIST  SELF-TST  HEX-DUMP

  V-ALMNT

<PPR-OUT>      CNTONLY   DETECT    IGNORE