Fujitsu dl-3750 Benutzerhandbuch

TROUBLE-SHOOTING

7-4

User's Manual

Table 7.2 describes common paper handling problems and suggests solutions.

See Chapter 3 for detailed procedures on loading and using paper.

Paper cannot be

Make sure that the paper select lever is set

loaded or fed.

correctly.  Move the lever backward for continuous

forms and forward for single sheets.

Make sure that the paper covers the paper-out sensor,

i.e., the left paper edge is within 52 mm for single

sheets or 41 mm for continuous forms from the left

edge of the platen.  (This problem cannot occur if you

use the forms tractor unit or insert a single sheet with

its left edge in contact with the left paper guide.)

Make sure that the paper holder is closed and forms

tractors are positioned correctly to match the width of

your paper.

Make sure that the printer does not detect the paper

after you have ejected the loaded paper manually.

If the printer detects paper even though it has already

been ejected, press the LOAD button and have the

printer perform the paper ejection operation, then load

the paper again.

If an error occurs

If an error occurs during printing with Windows,

during printing with execute reset from the control panel or turn off the

Windows, simply

printer, then print the page again.

printing the page

again will cause the

printed characters

to be garbled.