Fujitsu dl-3750 Benutzerhandbuch

SETTING UP

User's Manual

2-7

3. Hold the cut sheet stand at an angle over the top of the printer.  Slide

the mounting pins into the long, front grooves of the notches.  This is

the cut sheet stand's up position, used for printing single sheets.

To rotate the cut sheet stand to its down position, grasp it at the sides

and lift it up until the two upper mounting pins clear the front notches.

Rotate the cut sheet stand backward to place the upper mounting pins

in the rear grooves.

The printer uses a black ribbon cartridge.  To install the ribbon cartridge:

1. Turn the printer off. Open the front cover of the printer.  For easy

installation, slide the print head carriage so that it does not face a bail

roller.

2. The paper thickness lever, located on the right of the printer, has nine

positions.  Before you install the ribbon cartridge, move this lever to D.

Paper thickness lever

Move to D.