Fujitsu dl-3750 Benutzerhandbuch

SETTING UP

User's Manual

2-23

Before printing with your software, verify that the correct emulation is

selected on your printer.  This section describes the available emulations and

their selection.

The printer’s preselected factory setting is the Fujitsu DPL24C PLUS

emulation.  If this emulation is acceptable, you may skip this section.

An emulation is a set of commands used by your software to communicate

with the printer.  There are many different emulations available for printers.

Each emulation has unique features and capabilities.  This printer offers three

resident emulations:

•

Fujitsu DPL24C PLUS (for Fujitsu DL-series printers)

•

IBM Proprinter XL24E

•

Epson ESC/P2

Resident emulations are stored in the printer’s permanent memory.

Here are some points to help you determine which emulation to select:

√

Determine which emulations your software supports.  (Refer to your

software documentation.)  Since most software programs support this

printer, try to run a program with the factory default emulation first.

(DPL24C PLUS emulation is the factory default.)  Try this emulation

even if you are not sure of which emulation to choose.  See Chapter 5

for detailed information about how your printer communicates with

your software.

√

If you are using more than one software package, determine which

emulation is supported by the software you use most frequently.

Select that emulation.

√

If your software supports more than one emulation, select the

DPL24C PLUS emulation if possible.  This emulation has the greatest

capabilities.

√

If you want to use an emulation that is not supported by your software,

contact your software manufacturer or printer dealer and ask whether

support is available.  You may be able to obtain a printer driver that is

not shipped with the original software package.