Fujitsu dl-3750 Benutzerhandbuch

User's Manual

PAPER HANDLING

3-1

This chapter explains how your printer uses paper.

Topics covered are:

•

Selecting paper

•

Overview of paper operations

•

Adjusting for paper thickness

•

Using single sheets

•

Using continuous forms

•

Feeding and positioning paper

•

Switching paper types

Tips for paper handling are given at the end of this chapter.  Check that

section if you are using multipart forms, envelopes, or labels.

The printer can handle either single sheets or continuous forms.  Single sheets,

also called cut sheets, include envelopes and noncontinuous, multipart forms.

Continuous forms include labels and multipart forms fed into the printer using

the forms tractors.

For best results, use paper that meets the specifications listed below.  (See

Appendix B for detailed specifications.)  If you are unsure of the suitability of

a particular paper, try testing the paper or consult your dealer.

Length

80

Single sheets: 76 to 364 mm (3 to 14.3 in)

column Continuous forms: 102 mm (4 in) or greater
136

Single sheets: 76 to 420 mm (3 to 16.5 in)

column Continuous forms: 102 mm (4 in) or greater

Width

80

Single sheets: 102 to 267 mm (4 to 10.5 in)

column Continuous forms: 102 to 267 mm (4 to 10.5 in)
136

Single sheets: 102 to 420 mm (4 to 16.5 in)

column Continuous forms: 102 to 420 mm (4 to 16.5 in)

Thickness

0.35 mm (0.014 in) maximum total thickness.

Copies

1 to 5 copies, including the original.
For carbon-interleaved paper, the carbon counts as a
copy.

3