Fujitsu dl-3750 Benutzerhandbuch

PAPER HANDLING

User's Manual

3-18

To switch from single sheets to continuous forms:

1. If a sheet of paper is loaded, remove the paper by turning the platen

knob or pressing and holding down the LF/FF button.

2. Move the paper select lever to the rear to the continuous forms

position.

3. Press the LOAD button.  The continuous forms paper advances to the

top-of-form position.

You are now ready to print using continuous forms paper.

•

Use high-quality paper.  Do not use paper that is wrinkled or curled at

the edges.

•

Do not use paper with staples or metal parts.

•

Do not use paper with unpredictable variations in thickness, such as

paper with partial multilayers, paper with embossed printing, and

labels with the backing sheet exposed.

•

Store paper in a clean, dry environment.

•

Avoid using carbon-interleaved single sheets if possible.  Printing

tends to become misaligned on the bottom sheet.

•

To ensure smoother feeding of paper-stapled, multipart forms,

raise the cut sheet stand to support the forms.