Fujitsu dl-3750 Benutzerhandbuch

PRINTING

PRINTING

User's Manual

4-5

3. Press the ONLINE button to return online.  You are ready to print

using the selected menu.

Before you start to print, make sure that paper is loaded.  Also, verify that the

paper thickness lever is set to the appropriate position (1 to D).

To start printing, press the ONLINE button to place the printer online.  Then

start your software.

To stop printing immediately, press the ONLINE button to place the printer

offline.  You can also use your software to stop printing, but there will be a

slight delay before printing stops.  Any data sent to the print buffer but not yet

printed is stored until you resume printing.  Data in the print buffer is lost if

you turn the printer off.

To resume printing, press the ONLINE button again.  To cancel printing, use

the cancel commands provided by your software or computer.  To clear the

print buffer, place the printer offline and press the MENU and TEAR OFF

buttons.  Any data sent to the print buffer before you canceled printing will be

lost.

The printer can “sense” when paper runs out.  Depending upon how PPR-

OUT (paper-out) is set in setup mode, the printer either:

•

Stops printing and lights the red PAPER OUT indicator, or

•

Continues printing until no more data remains in the printer.

See Chapter 5 for details on setting PPR-OUT.  The factory default is to stop

printing if continuous forms paper runs out and to continue printing if single

sheet paper runs out.

To resume printing when paper runs out, use either of the methods described

below: