Fujitsu dl-3750 Benutzerhandbuch

USING SETUP MODE

User's Manual

5-4

Select Function

SAVE & END

Exits setup mode and saves any changes made

while in setup mode.

MENU1 and

Assigns print features to MENU1 and

MENU2

MENU2 on the printer control panel.

HARDWRE

Changes the printer hardware options.

ADJUST

Changes the print position adjustment options.

CONFIG

Changes the configuration options.

The initial printout contains a header, help menu, and <<FUNCTION>>

menu.  The header tells you  that the printer is offline and in setup mode.  The

help menu provides a quick summary of how to use setup mode.  The

<<FUNCTION>> menu lists all of the functions available to you in setup

mode.  Note that the red cursor on the plastic print guide is initially positioned

below the SAVE & END function.

Setup mode can also be entered by turning off the printer, then turning the

printer back on while pressing the TEAR OFF and ONLINE buttons simulta-

neously until the printer beeps.

When you enter setup mode, the following <<FUNCTION>> menu is printed:

<<FUNCTION>>

  SAVE&END  MENU1  MENU2  HARDWRE  ADJUST  CONFIG  DEFAULT  LIST  SELF-TST  HEX-DUMP

  V-ALMNT

Table 5.1 summarizes the purpose of each function.