Fujitsu dl-3750 Benutzerhandbuch

USING SETUP MODE

User's Manual

5-12

MENU1

EMULATE

The emulation selected on the printer

must be the same as the emulation

selected in your software. If you selected

an emulation when you set up the

printer (Chapter 2), you do not need to

change the EMULATE option unless you

want to change to a different emulation.

The emulation assigned to MENU1 is the

default when you turn the printer on.

See the section Changing MENU1 and

MENU2 Options later in this chapter.

MENU2

None

If you use MENU2, the emulation selected

for MENU 2 must be the same as the

emulation selected in your software.

See the section Changing MENU1 and

MENU2 Options later in this chapter.

DECIDING WHICH
OPTIONS TO CHANGE

The previous page shows a printout of the printer’s factory default settings. In

this printout, options are listed by functional group:

•

Menu 1 settings (MENU1 function)

•

Menu 2 settings (MENU2 function)

•

Hardware settings (HARDWRE function)

•

Print position adjustment settings (ADJUST function)

•

Configuration settings (CONFIG function)

Most selectable options only alter print features, such as the typestyle,

page format. However, some options must be selected correctly for the

printer to work properly with your hardware and software. For each

function, Table 5.2 lists items whose options must be selected correctly for

system and printer accessory compatibility.

Table 5.2 Required Options

Function

Item

Option