Fujitsu S1300 Betriebsanweisung
How to Perform a Scan (for Mac OS users)
179
6.
Press the [Scan] button on the ScanSnap.
D Scanning starts.
D The [Scan] button on the ScanSnap flashes blue during scanning.
The following window appears to show the scanning progress.
D When scanning is completed, the corresponding action of the selected profile is
performed.
z
The [Scan] button setting is set to [Duplex Scan (Double-sided)] by default.
Note that you can switch the [Scan] button setting to [Simplex Scan (Single-sided)] in
ScanSnap Manager. For more details, refer to
Note that you can switch the [Scan] button setting to [Simplex Scan (Single-sided)] in
ScanSnap Manager. For more details, refer to
.
z
You can also start the scanning from the ScanSnap Manager menu.
For more details, refer to
For more details, refer to
z
Do not connect and disconnect the ScanSnap and other USB devices during scanning.
z
Do not close the ADF paper chute (cover) during scanning.
z
Do not switch users during scanning.
z
By default, documents are scanned by the following settings: [Image quality: Normal],
[Color mode: Auto Color Detection], [Scanning side: Duplex Scan].
For information on how to change scan settings, refer to
[Color mode: Auto Color Detection], [Scanning side: Duplex Scan].
For information on how to change scan settings, refer to
.
z
Before scanning documents of printed or handwritten text, select the [Scanning] tab J
[Option] button J [Setting for text only document] checkbox in the ScanSnap setup
window.
[Option] button J [Setting for text only document] checkbox in the ScanSnap setup
window.
z
The application that starts after scanning varies depending on what is selected in the
[Application] tab in the ScanSnap setup window. For details, refer to the ScanSnap
Manager Help.
[Application] tab in the ScanSnap setup window. For details, refer to the ScanSnap
Manager Help.
z
The output image may slightly differ from the original document in size.
z
When Cardiris is started and becomes active (Cardiris selected in the menu),
ScanSnap Manager automatically links with the active application, the settings of which
are used for scanning. Automatic linkage is disabled when the application is not active.
For information on automatic linkage, refer to
ScanSnap Manager automatically links with the active application, the settings of which
are used for scanning. Automatic linkage is disabled when the application is not active.
For information on automatic linkage, refer to
.