Franklin qts-2040 Betriebsanweisung
3
Warning: Never install or remove a
book card when your BOOKMAN is
turned on. If you do, information that
you’ve entered in its built-in book, as
well as in any other installed book
cards, will be erased.
book card when your BOOKMAN is
turned on. If you do, information that
you’ve entered in its built-in book, as
well as in any other installed book
cards, will be erased.
1. Turn your BOOKMAN off.
2. Turn your BOOKMAN over.
3. Align the tabs of the book
2. Turn your BOOKMAN over.
3. Align the tabs of the book
card with the notches in the
slot.
slot.
4. Press the book card down
until it snaps into place.
Installing a Book Card
Selecting a Book
➤ Removing a Book Card
Warning: When you remove a
book card from your BOOKMAN,
information that you entered in the
removed book card will be erased.
book card from your BOOKMAN,
information that you entered in the
removed book card will be erased.
Once you’ve installed a book card in
your BOOKMAN, you can select
which book you want to use.
your BOOKMAN, you can select
which book you want to use.
1. Turn your BOOKMAN on.
2. Press
2. Press
CARD
.
These are sample books.
3. Press or to highlight a
book symbol.
4. Press
ENTER
to select it.
➤ Resuming Where You Left Off
You can turn off your BOOKMAN
at any time. When you turn on your
BOOKMAN again, unless you have
removed a book card, the screen
that you last viewed appears.
at any time. When you turn on your
BOOKMAN again, unless you have
removed a book card, the screen
that you last viewed appears.