Fujitsu S510 Anleitung Für Quick Setup

4. 

After the installation is completed, please restart your 
computer. 

 

Refer to the “ScanSnap S510 Operator’s Guide” 
in the ScanSnap Setup CD-ROM to learn more 
about the installation of ScanSnap Manager, 
ScanSnap Organizer and CardMinder. 

2.2. Connecting the ScanSnap 

After ScanSnap Manager has been installed and computer 
has been restarted, please connect the ScanSnap. 

2.2.1. Connecting the AC cable 

CAUTION

 

Do not use AC adapters other than the following 

Manufacturer 

AC-adapter model number 

LEI NU40-2160250-I3 
SANKEN ELECTRIC CO,. LTD 

SEB55N2-16.0x  （x= A-Z or Blank） 

1. 

Connect the AC cable to the AC adapter (collectively 
called the power cable). 

 

 

Use only the supplied AC cable and AC adapter 
(power cable). 

2. 

Plug the power cable into the power connector on the 
back side of the ScanSnap, and the other end to a wall 
outlet. 

 

 

2.2.2. Connecting the USB cable 

Follow the procedure below to connect the USB cable.   

 

●  Use only the USB cable supplied with this 

scanner. When connecting to a USB hub, be sure 
to connect the scanner to the hub nearest to your 
computer (first stage). If you connect it to a USB 
hub from the second stage onwards, ScanSnap 
may not operate correctly. 

●  If you connect the scanner with USB 2.0, it is 

required that the USB port and the Hub are 
compliant with USB 2.0. The scanning speed may 
slow down when you connect the scanner with 
USB 1.1. If your computer has the USB 2.0 
compatible port, use it. 

1. 

Remove the seal from the USB connector on the back 
side of the ScanSnap. 

2. 

Connect the USB cable to the USB connector on the 
ScanSnap, and the other end of the USB cable into 
the USB port on your personal computer. 

 

3. 

Open the Paper chute of ScanSnap. 

 ScanSnap is automatically detected by your computer. 

4. 

The ScanSnap is added as new hardware. 

How to add hardware varies depending on the operating 
system running on your computer. 

The "Digital Signature not Found" dialog box 

appears.  

Click the [Yes] button. 

 The ScanSnap is added to your computer as new 

hardware. 

 

1) When the "Found New Hardware Wizard" dialog box 

appears, select "No, not this time" and then click the 
[Next >] button.   

 

*The window above only appears when the Service Pack 2 

is installed. 

2) Select how to install the software required for the 

hardware and click the [Next >]. 

 The "Hardware Installation" dialog box appears. 

USB cable 

Outlet 

Power 
connector 

Power 
cable 

10