Humminbird 1158c combo Betriebsanweisung
143
Chart Menu Tab
Lat/Lon Grid
Settings: Hidden, Visible, Default = Hidden
Lat/Lon Grid allows you to display or hide a grid showing latitude and longitude lines.
Navaids on Bird’s Eye View
Settings: Hidden, Visible, Default = Visible
Navaids on Bird's Eye View allows you to display or hide additional navigational aids in Bird’s
Eye View, such as lights and buoys.
Eye View, such as lights and buoys.
NOTE: You will see more navigational aids with an optional-purchase SD card.
Chart Select
Settings: Auto, Contour XD, Left Chart Card, Right Chart Card;
Default = Auto
Default = Auto
Chart Select allows you to choose which chart to use if you have built-in charts or a map card.
If you select Auto, your unit will select a chart automatically. Select Right to use the SD card
installed in the right card slot, and select Left to use the SD card installed in the left card slot
(see SD Memory Card Slots: Add Maps to Your Fishing System).
If you select Auto, your unit will select a chart automatically. Select Right to use the SD card
installed in the right card slot, and select Left to use the SD card installed in the left card slot
(see SD Memory Card Slots: Add Maps to Your Fishing System).
NOTE: The SD Cards require a separate purchase. For more information, visit our Web site at
humminbird.com or contact our Customer Resource Center at 1-800-633-1468.
humminbird.com or contact our Customer Resource Center at 1-800-633-1468.
Set Simulation Position
(Advanced)
Settings: Press the RIGHT Cursor key and follow screen instructions to
activate.
activate.
Set Simulation Position allows you to set the position of the boat used in the Simulator. Press
any arrow on the 4-WAY Cursor Control key to activate the cursor and move it to the coordinates
where you want start the simulation. Then confirm the position using the Set Simulation menu
setting.
any arrow on the 4-WAY Cursor Control key to activate the cursor and move it to the coordinates
where you want start the simulation. Then confirm the position using the Set Simulation menu
setting.
NOTE: The cursor must be active in order for this procedure to work. If the cursor was not active before
you began this procedure, an error message will appear. Exit the menu, set the cursor, then try again.
you began this procedure, an error message will appear. Exit the menu, set the cursor, then try again.
z