Humminbird 1158c combo Betriebsanweisung
Introduction to Navigation
78
Save, Edit, or Delete a Waypoint
Save your current position as a waypoint: On any view, press the MARK key to save the current
position of the boat as a waypoint.
position of the boat as a waypoint.
Save the cursor position as a waypoint: On the Chart or Combo View, use the 4-WAY Cursor
Control key to move the cursor to the position you want to save as a waypoint. Then press the
MARK key to save the position as a waypoint.
Control key to move the cursor to the position you want to save as a waypoint. Then press the
MARK key to save the position as a waypoint.
Save a position from the sonar history: On any Sonar View, Side Imaging® View, or
Down Imaging™ View, use the 4-WAY Cursor Control key to move the cursor to a feature in the
sonar history. Press the MARK key to create a waypoint at the location where that sonar reading
was taken. The new waypoint will also record the depth at that location.
Down Imaging™ View, use the 4-WAY Cursor Control key to move the cursor to a feature in the
sonar history. Press the MARK key to create a waypoint at the location where that sonar reading
was taken. The new waypoint will also record the depth at that location.
Display the Waypoints Submenu: From any view, press the MENU key twice to display the
Main Menu, then press the RIGHT Cursor key to select the Navigation tab. Select Waypoints,
and press the RIGHT Cursor key to display the Waypoints submenu.
Main Menu, then press the RIGHT Cursor key to select the Navigation tab. Select Waypoints,
and press the RIGHT Cursor key to display the Waypoints submenu.
Program a specific position as a waypoint: To create a waypoint that is NOT your current
position, from the Waypoints submenu select Create, and press the RIGHT Cursor key. Use the
4-WAY Cursor Control key to program a waypoint name, latitude, longitude, and icon before
selecting Save.
position, from the Waypoints submenu select Create, and press the RIGHT Cursor key. Use the
4-WAY Cursor Control key to program a waypoint name, latitude, longitude, and icon before
selecting Save.
Edit a waypoint: From the Waypoints submenu, select Edit and press the RIGHT Cursor key to
display the saved waypoints list. Select the waypoint you want to edit and press the RIGHT
Cursor key. Use the 4-WAY Cursor Control key to edit a waypoint name, latitude, longitude, and
icon before selecting Save.
display the saved waypoints list. Select the waypoint you want to edit and press the RIGHT
Cursor key. Use the 4-WAY Cursor Control key to edit a waypoint name, latitude, longitude, and
icon before selecting Save.
To make it easier to select a waypoint to edit, select Sort By and press the RIGHT or LEFT Cursor
keys to select a sort order:
keys to select a sort order:
• Name shows the waypoints alphabetically.
• Time shows the most recently-created waypoint first.
• Distance shows the closest waypoint first.
NOTE: When you save a waypoint by any of these methods, a numerical waypoint name is
automatically assigned. You can edit the waypoint information later to give it a different name and
select an icon to represent it (see Program or Edit the waypoint fields).
automatically assigned. You can edit the waypoint information later to give it a different name and
select an icon to represent it (see Program or Edit the waypoint fields).