AG Neovo F-17C Betriebsanweisung

ROUBLESHOOTING

Troubleshooting Procedures

This LCD monitor comes pre-adjusted with standard VGA timing. Due to output timing dif-

ferences among various VGA cards, you may initially experience an unstable or unclear dis-

play when a new display mode or new VGA card is selected.

Before applying any of the following troubleshooting procedures, you should first press the

AUTO

button to run the optimal adjustment option in the OSD menu.

Warning Messages

Message

Solution

CAN NOT DISPLAY THIS INPUT

SIGNAL

The input signal is not acceptable by the monitor.

•

Ensure that the video resolution and frequency range

are within that specified for the monitor. (Refer to the

“Technical Specifications” section of this user’s man-

ual for details.)

NO SIGNAL INPUT

No signal inputs are detected from either VGA-In .

•

Check that the power switch of your computer or

video source is in the “ON” position.

•

Check that the video signal cable is properly con-

nected.

•

Ensure that no pins are bent or pushed in the video-

input connector.

MAIN CONTROL MENU LOCKED

/UNLOCKED

The main control menu (On-Screen Display menu) is locked

to avoid unwanted adjustment.

•

Press

buttons together for 5 seconds to

unlock the main control menu.

ADJUSTING FREQUENCY

ADJUSTING PHASE

ADJUSTING POSITION

The monitor is detecting the input signal and automatically

adjusting the monitor parameters accordingly.

It takes around 5 seconds to finish the whole process.

•

You are recommended to auto adjust by pressing the

button every time you change the resolution or

refresh rate.