RCA ez219 Betriebsanweisung

14

Connecting to external devices

Viewing videos on TV

1.  Plug in the AV cable (provided) – Insert the single 

connector end into the camcorder (AV jack) and 
connect the double connector ends to the 
corresponding video (yellow) and audio (white) 
input jacks on the TV. 

 

 

2.  Turn on the TV and the camcorder.

3.  Switch the TV to the selected video input. 
•  Refer to your TV manual for instructions.

4.  You may play and delete videos viewed on the 

TV by using the camcorder buttons.

Recording videos to VHS tape or DVD 

1.  Plug in the AV cable (provided) – Insert the 

single connector end into the camcorder and 
connect the double connector ends to 
corresponding video (yellow) and audio (white) 
inputs of the recording device (VHS or DVD 
recorder).

2.  Turn on the camcorder and the recording device.

3.  Switch recording device to the video input 

connected to the camcorder. 

•  Refer to your user manual of the recording 

device for instructions.

4.  Start recording of your recording device and 

press and hold PLAY/PAUSE on the camcorder 
for 3 seconds to play all videos on the camcorder. 

For best viewing or recording quality, 
use the HDMI connector on the left 
panel of the camcorder with an HDMI 
cable (not included). 

The default TV output standard is NTSC. 
You can switch it to PAL standard by 
going to the camcorder menu. Refer to  
"Menu settings" for more information.