Blodgett dfg100 addl Техническое Руководство
BLODGETT OVEN COMPANY
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183
MODEL DFG-100
SHORT FORM SPECIFICATIONS
Provide Blodgett full-size convection oven model DFG-l00, (single/double) compartment. Each compartment shall have (porcelainized/stainless) steel liner and shall accept five I8" x 26"
standard full-size bake pans. Stainless steel front, top and sides. Doors shall be (solid stainless steel/ have dual pane thermal glass windows) with single porcelain handle and simulta-
neous operation. Unit shall be gas heated with electronic spark ignition and shall cook by means of a dual-flow system combining direct and indirect heat with a gas shutoff switch on the
front of the control panel. Air in baking chamber distributed by dual inlet blower wheel powered by a two-speed (single speed for CE model), 1/3 HP motor with thermal overload protec-
tion. Each chamber shall be fitted with two commercial lamps and five chrome-plated removable racks. Control panel shall be recessed with Cook/Cool Down mode selector, solid state
(manual/digital) infinite thermostat (200- 500°F), and 60-minute timer. Provide two years parts and one year labor warranty (check for exclusions). Provide options and accessories as indi-
cated.
Provide Blodgett full-size convection oven model DFG-l00, (single/double) compartment. Each compartment shall have (porcelainized/stainless) steel liner and shall accept five I8" x 26"
standard full-size bake pans. Stainless steel front, top and sides. Doors shall be (solid stainless steel/ have dual pane thermal glass windows) with single porcelain handle and simulta-
neous operation. Unit shall be gas heated with electronic spark ignition and shall cook by means of a dual-flow system combining direct and indirect heat with a gas shutoff switch on the
front of the control panel. Air in baking chamber distributed by dual inlet blower wheel powered by a two-speed (single speed for CE model), 1/3 HP motor with thermal overload protec-
tion. Each chamber shall be fitted with two commercial lamps and five chrome-plated removable racks. Control panel shall be recessed with Cook/Cool Down mode selector, solid state
(manual/digital) infinite thermostat (200- 500°F), and 60-minute timer. Provide two years parts and one year labor warranty (check for exclusions). Provide options and accessories as indi-
cated.
DIMENSIONS:
Floor space
38-1/4" (972mm) W x 36-7/8" (937mm) D
Product clearance
Oven Back
Oven Back
0" from combustible and non-combustible construction.
Oven Sides
2" from combustible and non-combustible construction.
Interior
29" (737mm) W x 20" (508mm) H x 24-1/4" (616mm) D
If oven is on casters:
Single
Single
Add 4-1/2" (114mm) to all height dimensions
Double
Height dimensions remain the same
Double Low Profile
Subtract 2.5” (64mm) from all height dimensions
GAS SUPPLY:
3/4" NPT
Manifold Pressure:
Manifold Pressure:
• Natural – 3.5" W.C
• Propane – 10" W.C.
Inlet Pressure:
• Natural – 7.0" W.C. min. – 10.5" W.C. max.
• Propane – 11.0" W.C. min. – 13.0" W.C. max.
• Propane – 11.0" W.C. min. – 13.0" W.C. max.
MAXIMUM INPUT:
Single
55,000 BTU/hr (16.2 Kw)
Double
110,000 BTU/hr (32.4 Kw)
POWER SUPPLY:
115 VAC, 1 phase, 6 Amp, 60 Hz., 2-wire with ground,
1/3 H.P., 2 speed motor, 1140 and 1725 RPM
230V CE model, 1 phase, 3 Amp, 50 Hz., 2-wire with ground,
1/3 H.P., 1 speed motor, 1425 RPM
6' (1.8m) electric cord set furnished on 115 VAC ovens only.
1/3 H.P., 2 speed motor, 1140 and 1725 RPM
230V CE model, 1 phase, 3 Amp, 50 Hz., 2-wire with ground,
1/3 H.P., 1 speed motor, 1425 RPM
6' (1.8m) electric cord set furnished on 115 VAC ovens only.
MINIMUM ENTRY CLEARANCE:
Uncrated
32-1/16" (814mm)
Crated
37-1/2" (953mm)
SHIPPING INFORMATION:
Approx. Weight:
Single
Single
590 lbs. (268 kg)
Double
1095 lbs. (497 kg)
Crate sizes:
37-1/2" (952mm) x 43-1/2" (1105mm) x 51-3/4" (1315mm)
37-1/2" (952mm) x 43-1/2" (1105mm) x 51-3/4" (1315mm)
Printed in U.S.A.
NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components without prior notice
APPROVAL/STAMP
P/N 35023 Rev V (6/11)