Printronix P5000 Benutzerhandbuch
Chapter 4
HOST INTERFACE
254
IEEE 1284 Parallel (Bidirectional) Submenu
The IEEE 1284 interface is faster and more versatile than
Centronics and supports bidirectional communication.
Configuration of this interface is controlled from the host. Refer to
“IEEE 1284 Parallel Interface” on page 286 more details about the
available modes (Compatibility, Nibble, and Byte).
Centronics and supports bidirectional communication.
Configuration of this interface is controlled from the host. Refer to
“IEEE 1284 Parallel Interface” on page 286 more details about the
available modes (Compatibility, Nibble, and Byte).
Prime Signal
•
Disable (default). The parallel port will not perform a warm start
(reboot) if the host asserts the prime signal.
(reboot) if the host asserts the prime signal.
•
Enable. The parallel port will perform a warm start (reboot) if
the host asserts the prime signal.
the host asserts the prime signal.
TOF Action
•
Reset (default). A form feed is performed before a warm start
when the prime signal is asserted from the host. This setting is
used only if the prime signal parameter is enabled.
when the prime signal is asserted from the host. This setting is
used only if the prime signal parameter is enabled.
•
Do Nothing. Nothing occurs before a warm start when the
prime signal is asserted from the host.
prime signal is asserted from the host.
IEEE 1284
Prime
Signal
TOF
Action
Buffer Size
in K
Enable*
Disable
Disable
Reset*
Do Nothing
Do Nothing
16*
1-15
1-15
* = Factory Default
Auto
Trickle
Disable*
Enable
Enable
Trickle
Time
1/4 sec*
1/2 sec
1 sec
2 sec
4 sec
8 sec
16 sec
Off
1/2 sec
1 sec
2 sec
4 sec
8 sec
16 sec
Off