Printronix P5000LJ Verweishandbuch
174
Chapter
5
Configuring the Epson FX-1050 Emulation with Control Codes
Line Spacing 1/6 Inch (6 lpi)
ASCII Code ESC 2
Hex Code
1B 32
Dec Code
27 50
Purpose
Sets the line spacing to 1/6 inch (6 lpi) for subsequent line feeds.
Discussion The 2 is ASCII
character 2, not hex 02.
When ESC 2 is received, all lines are printed at 6 lpi until a new
line spacing is selected or the printer is reset.
line spacing is selected or the printer is reset.
This control code overrides line spacing set at the control panel.
Example
The following example illustrates 1/6-inch line spacing.
Line Spacing 1/8 Inch (8 lpi)
ASCII Code ESC 0
Hex Code
1B 30
Dec Code
27 48
Purpose
Sets the line spacing to 1/8 inch (8 lpi) for subsequent line feeds.
Discussion The 0 is ASCII character 0 (zero), not hex 00. When ESC 0 is
received, all lines are printed at 8 lpi until a new line spacing is
selected or the printer is reset. This control code overrides line
spacing set at the control panel.
selected or the printer is reset. This control code overrides line
spacing set at the control panel.
Example
The following example illustrates 1/8-inch line spacing.