Printronix l7032 Verweishandbuch

 261

(cc) 

dir N Y data (cc)G

(cc)

Represents the Special Function Control Code 
(SFCC). Enter the specific SFCC for your VGL 
configuration.

dir

Represents the direction of the bar code. Enter B 
for horizontal bar codes. Enter C for vertical bar 
codes.

N

Turns off the readable data field. Enter N.

Y

The type code for Royal Mail. Enter Y.

data

The bar code data. A check digit is automatically 
added by VGL.

(cc)G

Terminates the bar code command. Enter the 
SFCC for your VGL configuration immediately 
followed by any valid command character or G, the 
universal sequence terminator.

The following command generates the horizontal Royal Mail bar code shown 
below. In the command sequence, graphics mode data is 

italicized and bar 

code data is boldface. See Chapter 2 for a detailed description of 
alphanumeric commands.

^PY^-^M10,10,000^KF^BNY050LU178XE2B^G^KF^-^PN^-

^PY^- enabled the graphics command sequence.
^M introduced the standard alphanumeric command.
The character height selected was 1.0 inches and character width was 
selected at 1.0 inches.
A 0.0 justification value plus 0 additional dots was selected for the data 
placement.
^KF activated Dark Print.
^B introduced the bar code command.
N selected no readable data field.
Y selected Royal Mail bar code.
050LU178XE2B is the bar code data.
^G terminated the bar code command sequence.
^KF^- at the end of the bar code sequence turned off Dark Print.
^PN^- terminated the graphics mode.