Printronix l7032 Verweishandbuch
280
Chapter
3
Bar Codes
UPC-A Command Format
NOTE: See page 164 for the IBARC, command format and definitions.
Default Ratio:
(cc)
dir p type data (cc)G
Variable Ratio:
(cc)
dir p [9] [:] type [ratio] data (cc)G
(cc)
Represents the Special Function Control Code
(SFCC). Enter the specific SFCC for your VGL
configuration.
(SFCC). Enter the specific SFCC for your VGL
configuration.
dir
Represents the direction of the bar code. Enter B
for horizontal bar codes; enter C for vertical bar
codes.
for horizontal bar codes; enter C for vertical bar
codes.
p
Prints the optional readable data field. The
readable data field is printed below a horizontal bar
code or on the left-hand side of a vertical bar code.
readable data field is printed below a horizontal bar
code or on the left-hand side of a vertical bar code.
Replace
p in the bar code command with one of the
codes listed in Table 61 to print the readable data
field in the corresponding font with the specified
guard band gap.
field in the corresponding font with the specified
guard band gap.
NOTE: For UPC 100% PDF is printed in 12 cpi Letter Gothic. For UPC 80% it
is printed in 15 cpi Letter Gothic.
9 or :
Selects the variable ratio length bar code feature,
which permits unique bar and space width ratios
adjusted for specific applications.
which permits unique bar and space width ratios
adjusted for specific applications.
Enter the number 9 to select variable ratio bar
codes represented in line matrix printer dots (60 x
72 dpi).
codes represented in line matrix printer dots (60 x
72 dpi).
Enter : to select variable ratio bar codes
represented in actual printer dots (203 x 203 dpi or
300 x 300 dpi, depending on the printer head being
used).
represented in actual printer dots (203 x 203 dpi or
300 x 300 dpi, depending on the printer head being
used).
Table 61. Printable Data Field Fonts
Font
Gap
p code
Standard 10 cpi
3 dots
Y
OCR-A
3 dots
O
OCR-A
.1-inch
S
OCR-B
3 dots
B
OCR-B
.1-inch
T
None
N