Printronix l7032 Verweishandbuch

 290

The following command generated the horizontal default ratio UPC-E bar 
code below. In the command sequence, graphics mode data is 

italicized and 

bar code data is boldface. See Chapter 2 for a detailed description of 
alphanumeric commands.

^PY^-^M10,10,000^KF^BYR123456^G^KF^-^PN^-

^PY^- turned on the graphics command sequence.
^M introduced the standard alphanumeric command.
The character height selected was 1.0 inches and character width was 
selected at 1.0 inches.
A 0.0 justification value plus 0 additional dots was selected for the data 
placement.
^KF activated Dark Print.
^B introduced the bar code command.
Y selected the standard 10 cpi font to print the optional readable data field.
Letter R selected the 6-digit, number system 0 UPC-E bar code type.
123456 is the 6-digit bar code data (the first character, 1, is the number 
system character).
^G terminated the bar code command sequence.
^KF^- at the end of the bar code sequence turned off Dark Print.
^PN^- terminated the graphics mode.

The following command generated the vertical UPC-E bar code below using 
standard 10 cpi font with the standard default ratio and data of 123456:

^PY^-^M10,10,000^KF^CYR123456^G^KF^-^PN^-

upce ex1

upce.ex2