Printronix L5535 Benutzerhandbuch
Cleaning The Photoreceptor Drum
203
4.
If the drum contains toner build-up, clean it with the drum
freshener pad (listed on page 159). Turn the drum little by little
while polishing the drum surface with the freshener pad. Polish
with a slight force in the direction of the drum axis, using a
circular motion. Let the polished areas slightly overlap each
other, and polish the entire drum surface two or three times
repeatedly.
freshener pad (listed on page 159). Turn the drum little by little
while polishing the drum surface with the freshener pad. Polish
with a slight force in the direction of the drum axis, using a
circular motion. Let the polished areas slightly overlap each
other, and polish the entire drum surface two or three times
repeatedly.
5.
Using the special dry tissue paper (listed on page 159),
thoroughly wipe the drum freshener off the drum surface.
thoroughly wipe the drum freshener off the drum surface.
6.
Wipe the drum surface again using a Toraysee cloth.
7.
To avoid exposing the drum to light for a prolonged period of
time, temporarily pack the drum in its original packaging
material, and close the box cover. Set the drum aside for now.
(It will be installed in a later step.)
time, temporarily pack the drum in its original packaging
material, and close the box cover. Set the drum aside for now.
(It will be installed in a later step.)
8.
Remove the drum auxiliary rod from the drum shaft.
9.
Wipe the drum shaft clean with a cloth.