Printronix P7000 Benutzerhandbuch
28
Chapter
3
The Control Panel
JOB SELECT
In offline mode, this key allows for fast selection of any of the previously
stored configurations. Pressing this key causes the printer to cycle through
the following messages: Load Config., Factory Config, Load Config 1, Load
Config 2, Load Config 3,...,Load Config 8.
stored configurations. Pressing this key causes the printer to cycle through
the following messages: Load Config., Factory Config, Load Config 1, Load
Config 2, Load Config 3,...,Load Config 8.
ENTER
When navigating the configuration menus, ENTER selects the currently
displayed option value as the active value. An asterisk (*) appears next to the
active value on the display. ENTER is also used for starting and stopping
printer tests and generating a configuration printout.
displayed option value as the active value. An asterisk (*) appears next to the
active value on the display. ENTER is also used for starting and stopping
printer tests and generating a configuration printout.
NOTE: The ENTER key must be unlocked in order to function.
See UP + DOWN, below.
The ENTER key lock and unlock function can be configured to be a
key combination other than
The ENTER key lock and unlock function can be configured to be a
key combination other than
=
+
>
(see page 225).
UP or DOWN (
=
or
>
)
Moves up or down between levels in the configuration menus and makes
vertical forms adjustment. After pressing VIEW, press
vertical forms adjustment. After pressing VIEW, press
=
or
>
to adjust the
paper up or down in 1/72 inch increments for fine vertical forms alignment.
When the printer is in offline mode, press
When the printer is in offline mode, press
=
or
>
to move through levels in the
configuration menus.
UP + DOWN (
=
+
>
)
Locks and unlocks the ENTER key.
NOTE: The ENTER key lock and unlock function can be configured to be a
key combination other than
=
+
>
(see page 225).
PREV or NEXT (
;
or
<
)
Moves between the options on the current level of configuration menu. In the
configuration menu, press
configuration menu, press
;
to scroll backward or press
<
to scroll forward
through the menu selections on the same level.
PREV + NEXT (
;
+
<
)
When both keys are pressed simultaneously, the printer will reset to the
power-up configuration and reset its internal state (in offline mode).
power-up configuration and reset its internal state (in offline mode).
=
+ ON LINE (IPDS Emulation only)
In offline mode, press
=
+ ON LINE. If there is data in the printer buffer, the
printer will be placed in online mode, print one page, and return to the offline
mode. This action can be repeated until the end of a print job. Only one page
prints each time you press
mode. This action can be repeated until the end of a print job. Only one page
prints each time you press
=
+ ON LINE. If there is no data in the printer buffer, the printer is placed in
online mode.
In the fault state,
=
+ ON LINE does not work.