Escient avx-552 Anleitung Für Quick Setup

6640 Intech Blvd., Indianapolis, Indiana  46278

Phone: 800-372-4368 Press "3” For Support

Hours:  Monday - Friday 9:00am - 7pm EST

Fax: 317-616-6790

www.escient.com

Email: support@escient.com

Document Number: M42002-01A2

August 2006

Digital Media Manager
MX-752 & AVX-552

• Unpack the FireBall, cables, and accessories (save the box).

• Install the included batteries into the remote.

• Make note of the serial number (located on the back).

SERIAL NUMBER: ___________________________________________________

A)  Locate the included composite video and analog audio cables.

B)  Connect FireBall to the "DVD" or other available A/V input on your receiver or TV

  (not shown).

Note: You may use optional s-video or component video cables and optional digital audio 

cables for the best picture and sound quality. Contact your Escient dealer for more information.

A)  Locate the composite video and analog audio cables included with your changer.

B)  Connect the composite video output from the first changer to the VIDEO IN COMPOSITE 1

  on FireBall.

C)  Connect the analog audio cables from the first changer to the ANALOG AUDIO IN 1 on

  FireBall.

D)  Locate the included RS-232 serial cable.

E)  Connect the RS-232 serial cable from the first changer to COMMUNICATION PORT 1 on

  FireBall.

F)  Repeat steps A-E for each additional changer using video, audio, amd COM ports number

  2 - 5 on FireBall.

Note: You may use optional s-video or component video cables and optional digital audio 

cables for the best picture and sound quality. Contact your Escient dealer for more information.

Note: FireBall requires an Internet connection to identify the discs in the front panel drive and 

connected changers, to play Internet radio stations, and for general system maintenance.

• If you have a broadband (cable, DSL, ISDN) Internet Service Provider, connect the

included ethernet cable from FireBall's ethernet jack to your ethernet network.

• If you have a Dialup Internet Service Provider, you’ll need to configure Internet connection

sharing on a PC to the phoneline.

Note: You may need to purchase additional network hardware such as a "router”.

Please contact your Escient dealer for more information.

• Plug each changer into an AC outlet.

• Plug FireBall into an AC outlet.

• The Standby LED on the front of the FireBall will begin to flash RED during the

power on cycle. When the LED turns solid RED, the FireBall is ready for use.

• Press the power button on the front panel or on the remote control. The LED

will turn solid BLUE and video will be displayed on the TV when the unit is on. 

Note: You may have to press the "FB1" button on the remote to configure it to control FireBall. 

Also be sure the TV and receiver are turned on and set to the correct FireBall input.

• Use the remote control and follow the on-screen instructions.

Note: The supported Zone Player automatically 

switches between the Escient Movies Guide and the 

direct DVD input from the multi-zone Media Manager, 

therefore you are required to run direct video and 

audio cables from the zone 2 outputs of the 

multi-zone Media Manager to the Zone Player.

A)  To watch DVD movies in a second zone using the

  MP-200, connect a composite video cable from

  VIDEO OUT COMPOSITE 2 on the Media

  Manager to the COMPOSITE VIDEO IN on the

  Zone Player

B)  Connect an analog audio cable from ANALOG

  AUDIO OUT 2 on the Media Manager to ANALOG

  AUDIO IN on the Zone Player

C)  Connect the included Ethernet cable to your home

  network.

Note: You may use optional s-video or component 

video cables and optional digital audio cables for the 

best picture and sound quality. Contact your Escient 

dealer for more information.You must use the same 

types of video connections from the Media Manager 

to the Zone Player and from the Zone Player to your 

TV or A/V Receiver.