Toshiba DX735-D3330 Betriebsanweisung

36

Always make sure your computer and AC adaptor have adequate 
ventilation and are protected from overheating when the power is turned 
on or when an AC adaptor is connected to a power outlet (even if your 
computer is in Sleep mode). In this condition, observe the following:

 ❖

Never cover your computer or AC adaptor with any object.

 ❖

Never place your computer or AC adaptor near a heat source, 
such as an electric blanket or heater.

 ❖

Never cover or block the air vents including those located on the 
back of the computer.

 ❖

Always operate your computer on a hard flat surface.

Overheating your computer or AC adaptor could cause system 
failure, computer or AC adaptor damage or a fire, possibly resulting 
in serious injury.

Reconnect the cables.

Restart the computer.

TECHNICAL NOTE: You must have at least one memory module 
installed for the computer to work.

You can now continue setting up the computer. When the operating 
system has loaded, you can verify that the computer has recognized 
the additional memory module.

If you are adding extra memory after setting up the computer, verify 
that the computer has recognized it correctly as described in 

If you need to remove a memory module:

Complete steps 

 to shut down the computer and open the memory 

module slot cover.

Do not try to remove a memory module with the computer turned on. 
You can damage the computer and the memory module.

Do not remove the memory module while the computer is in Sleep or 
Hibernation mode. The computer could hang up the next time you 
turn it on and data in memory will be lost. In either of the above 
cases, the Sleep configuration will not be saved.