Toshiba sd-v280 Benutzeranleitung
65
Others
Before calling service personnel
Check the following guide for the possible cause of a problem before contacting service.
SYMPTOMS
POSSIBLE SOLUTIONS
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit, then plug it back in.
• Select the DVD or VCR mode before operating.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit, then plug it back in.
• Select the DVD or VCR mode before operating.
DVD/VCR does not operate.
DVD/VCR
PAGE
5
–
–
5
–
–
5
30,42
The remote control does not function.
• Aim at the remote control at the remote sensor.
• Operate within Approx. 7 Meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
• Check the frequency code is set correctly.
• Operate within Approx. 7 Meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
• Check the frequency code is set correctly.
13
DVD
No picture.
• Antenna connection is not correct or antenna cable is disconnected.
• The video channel is not in the correct position or the TV is not set to the video
• The video channel is not in the correct position or the TV is not set to the video
channel 3 or 4.
• Check the unit is connected correctly.
• The video input selector of the TV is not set to VIDEO. Set to VIDEO (or
• The video input selector of the TV is not set to VIDEO. Set to VIDEO (or
equivalent).
• Channel is set to the external mode.
No sound.
• Check the unit is connected correctly.
• Check the input selector of the amplifier is set properly.
• The unit is in the Special playback mode.
• Check the input selector of the amplifier is set properly.
• The unit is in the Special playback mode.
14~17
22
14~19
–
–
14~19
–
31,34
• Select proper language in the menu options.
Display is not shown in your language.
59
Playback doesn’t start.
• No disc is inserted.
• The disc may be dirty. Clean up the disc.
• The unit cannot play DVD-ROMs, etc.
• The disc may be dirty. Clean up the disc.
• The unit cannot play DVD-ROMs, etc.
Stopping playback, slow-motion play, repeat
play, or memory play, etc. cannot be
performed.
play, or memory play, etc. cannot be
performed.
• Some discs may not do some of the functions.
• When you press VCR MENU while watching a DVD with the connections of the
• When you press VCR MENU while watching a DVD with the connections of the
DVD exclusive terminal (S-VIDEO cable or COMPONENT cable) to a TV, you
cannot perform all the DVD functions. In this case, wait for approx. 60 seconds
with no pressing of any buttons.
cannot perform all the DVD functions. In this case, wait for approx. 60 seconds
with no pressing of any buttons.
42
42
42
42
42
–
–
–
No CATV reception
• Check all CATV connections.
• Station or CATV system problems, try another station.
• Station or CATV system problems, try another station.
16,17
Noise bars on screen.
• Tracking adjustment beyond range of automatic tracking circuit. Try Manual
tracking adjustment.
• Video heads are dirty.
• The tape is worn or damaged.
• The tape is worn or damaged.
VCR
• The erase prevention tab of the video cassette is broken off.
• The unit is in the external input mode.
• The unit is in the external input mode.
TV recording does not work.
29,34
Timer recording does not work.
• The time is not set correctly.
• The recording start/end time is not set correctly.
• The TIMER has not been pressed (
• The recording start/end time is not set correctly.
• The TIMER has not been pressed (
is not lit).
24
37
37
37
37
31
31
–
No subtitle
• Some discs have no subtitles.
• Subtitles are cleared. Press SUB TITLE.
• Subtitles are cleared. Press SUB TITLE.
Angle cannot be changed.
• Multi-angles are not recorded on the DVD disc.
• The function is prohibited with the unit or the disc.
appears on the screen.
51
50
–
No 4:3 (16:9) picture
• The setup does not match your TV.
No on-screen display
• Select Display On.
58
61
No surround sound
• The setup does not match your stereo system.
The unit or remote operation key is not
functioning.
functioning.
• Turn off the unit and unplug the AC power cord for several minutes, then replug it.
58
Playback does not start when the title is
selected.
selected.
• Check the Parental setup.
Audio soundtrack and/or subtitle language
is not changed when you play back a DVD.
is not changed when you play back a DVD.
• Multilingual language is not recorded on the DVD disc.
–
61
52
Symptoms and correction
2A70901D (E)p58-65
1/6/2002, 22:59
65