Toshiba A10 Benutzerhandbuch

73

There are two active regions on the TouchPad

™

 that allow you to 

scroll as you would with any wheel device on a mouse or trackball.

To scroll vertically, run your finger up or down along the right edge 
of the TouchPad. To scroll horizontally, run your finger along the 
bottom edge of the TouchPad. This feature can be disabled or 
changed in the Mouse Properties dialog box.

When a step instructs you to click or choose an item, move the 
cursor to the item, then press and release the primary (left-hand) 
button. To double-click, press the primary button twice in rapid 
succession. The primary button usually corresponds to the left 
mouse button.

The function of the secondary (right-hand) button depends on the 
program you are using. It usually corresponds to the right mouse 
button (“right-clicking”). Check your program’s documentation to 
determine whether it uses the right mouse button.

The TouchPad

™

 is enabled by default. To change the enable/disable 

TouchPad setting, press 

Fn

 + 

F9

. This hot key enables/disables the 

TouchPad. For more information, see 

Your computer comes with a built-in display, but you can also 
connect an external monitor or projector via the RGB (monitor) 
port.

You can easily attach an external monitor or projector to your 
computer if you need a larger screen. To do this:

Read the directions that came with the monitor to see if you 
first need to install new software.

Connect the monitor’s video cable to the RGB (monitor) port 
on the back of the computer.

Connect the device’s power cable to a live electrical outlet.