Toshiba M30 Betriebsanweisung
Troubleshooting
Satellite M30 Series
9-18
Satellite M30 Series
Version
1
Last Saved on 10.09.2003 13:14
ENGLISH using Mies10 Online.dot –– Printed on 10.09.2003 as
External Monitor
Refer also to Chapter 8, Optional Devices, and to your monitor’s
documentation.
documentation.
Problem Procedure
Monitor does not turn
on
on
Make sure that the external monitor’s power
switch is on. Confirm that the external monitor’s
power cable is plugged into a working power
outlet.
switch is on. Confirm that the external monitor’s
power cable is plugged into a working power
outlet.
No display
Try adjusting the contrast and brightness
controls on the external monitor.
controls on the external monitor.
Press hot keys Fn + F5 to change the display
priority and make sure it is not set for the internal
display.
priority and make sure it is not set for the internal
display.
Display error occurs
Check that the cable connecting the external
monitor to the computer is attached firmly.
monitor to the computer is attached firmly.
If problems persist, contact your dealer.
Modem
Problem Procedure
Communication
software can’t initialize
modem
software can’t initialize
modem
Make sure the computer’s internal modem
settings are correct. Refer to Phone and Modem
Properties in the Control Panel.
settings are correct. Refer to Phone and Modem
Properties in the Control Panel.
You can hear a dial
tone but can’t make a
call
tone but can’t make a
call
If the call is going through a PBX machine, make
sure the communication application’s tone dial
detection feature is disabled.
sure the communication application’s tone dial
detection feature is disabled.
You can also use the ATX command.
You place a call, but a
connection can’t be
made
connection can’t be
made
Make sure the settings are correct in your
communications application.
communications application.
After making a call
you can’t hear a ring
you can’t hear a ring
Make sure the tone or pulse selection in your
communications application is set correctly.
communications application is set correctly.
You can also use the ATD command.
Communication is cut
off unexpectedly
off unexpectedly
The computer will automatically cut off
communication when connection with the carrier
is not successful for a set time interval. Try
lengthening this time interval.
communication when connection with the carrier
is not successful for a set time interval. Try
lengthening this time interval.