Netgear fvm318 Installationsanleitung
Quick Installation Guide
Follow these quick steps to install your firewall.
Before you begin, be sure you have the configuration
parameters from your ISP handy.
parameters from your ISP handy.
1
1
Connect the Firewall
a.
Turn off your computer and Cable or DSL Modem.
b. Disconnect the Ethernet cable (A) from your computer which
connects to your Cable or DSL Modem.
c. Connect the Ethernet cable (A) from your Cable or DSL Modem
to the FVM318 firewall’s Internet port.
d. Connect the Ethernet cable (B) which came with the firewall
from a Local port on the router to your computer.
e.
Turn on the Cable or DSL Modem and wait about 30
seconds for the lights to stop blinking.
seconds for the lights to stop blinking.
2
2
Log In to the Firewall
Note: To connect to the firewall, your computer needs to be config-
ured to obtain an IP address automatically via DHCP. If you need
instructions on how to do this, please refer to the Reference
Manual on the CD which came with your firewall.
ured to obtain an IP address automatically via DHCP. If you need
instructions on how to do this, please refer to the Reference
Manual on the CD which came with your firewall.
Cable or DSL modem
LOCAL
10/100M
8
7
6
5
4
3
2
2
1
INTERNET
12VDC O.5A
FVM318 Wireless VPN Security Firewall
OFF
ON
LOCAL
10/100M
8
7
6
5
4
3
2
2
1
INTERNET
12VDC O.5A
FVM318 Wireless VPN Security Firewall
OFF
ON
a.
Turn on the firewall and wait for the test light to stop blinking.
b.
Now, turn on your computer and use a browser like Internet
Explorer or Netscape to connect to http://192.168.0.1
Explorer or Netscape to connect to http://192.168.0.1
Note: If you usually run software to log in to your Internet
connection, do not run that software.
connection, do not run that software.
c.
For security reasons, the firewall has its own user name and
password. When prompted, enter
password. When prompted, enter
admin
for the firewall User
Name and
password
for the firewall Password, both in lower
case letters.
3
3
Connect to the Internet
a.
You are now connected to the firewall. Click the
Yes
button in
the Setup Wizard.
b. Click
Next
to follow the steps in the Setup Wizard to input the
configuration parameters from your ISP to connect to the Internet.
Note: For wireless configuration or if you had problems
connecting, please refer to the Reference Manual on the
CD which came with the firewall.
connecting, please refer to the Reference Manual on the
CD which came with the firewall.
A
A
B
Cable/DSL ProSafe Wireless VPN Security Firewall FVM318
A