Netopia 4741 2a4na Betriebsanweisung

Configuring TCP/IP on a Windows computer requires the following:

■

An Ethernet card (also known as a network adapter)

■

The TCP/IP protocol must be “bound” to the adapter or card

To configure your PC for dynamic addressing do the following:

Note: You can also use these instructions to configure other computers on your network to accept IP addresses 
ser ved by the Netopia 4741.

1.

Go to the Star t 
Menu/Settings/Control 
Panels and double click 
the Network icon. From 
the Network components 
list, select the 
Configuration tab.

2.

Select TCP/IP-->Your Network Card. Then select 
Properties. In the TCP/IP Proper ties screen, select the IP 
Address tab. Click “Obtain an IP Address automatically”.

3.

Click on the DNS Configuration tab. Click Disable DNS. 
DNS will be assigned by the router with DHCP.

Click on the Gateway tab, and if there is an installed 
gateway, remove it.

4.

Click OK in this window and the next window. When 
prompted, reboot the computer.