Netopia r6100 Verweisanleitung

Select a filter from the table and press Return. The Change Filter screen appears. The parameters in this 
screen are set in the same way as the ones in the Add Filter screen (see 

).

To delete a filter, select Delete Input Filter or Delete Output Filter in the Add IP Filter Set screen to display a 
table of filters. 

Select the filter from the table and press Return to delete it. Press Escape to exit the table without deleting the 
filter.

To display a view-only list of filter sets, select Display/Change IP Filter Set in the IP Filter Sets screen.

To modify a filter set, select Display/Change IP Filter Set in the IP Filter Sets screen to display a list of filter 
sets.

Select a filter set from the list and press Return. The Change IP Filter Set screen appears. The items in this 
screen are the same as the ones in the Add Filter screen (see 

).

                                      Change Filter

                      Enabled:                    No
                      Forward:                    No

                      Source IP Address:          0.0.0.0
                      Source IP Address Mask:     0.0.0.0

                      Dest. IP Address:           0.0.0.0
                      Dest. IP Address Mask:      0.0.0.0

                      Protocol Type:              0

                      Source Port Compare...      No Compare
                      Source Port ID:             0
                      Dest. Port Compare...       No Compare
                      Dest. Port ID:              0

Enter the IP specific information for this filter.