Netopia r6100 Verweisanleitung

If you have configured multiple Ethernet IP subnets, the IP Setup screen changes slightly:

The IP address and Subnet mask items are hidden, and the Define Additional Subnets... item becomes Subnet 
Configuration.... If you select Subnet Configuration, you will return to the IP Subnets screen that allows you to 
define IP addresses and masks for additional Ethernet IP subnets.

Static routes are IP routes that are maintained manually. Each static route acts as a pointer that tells the 
Netopia R6000 Series how to reach a par ticular network. However, static routes are used only if they appear in 
the IP routing table, which contains all of the routes used by the Netopia R6000 Series (see 

).

Static routes are helpful in situations where a route to a network must be used and other means of finding the 
route are unavailable. For example, static routes are useful when you cannot rely on RIP. 

To go to the Static Routes screen, select Static Routes in the IP Setup screen and press Return.

                                  IP Setup

         Subnet Configuration...

         Default IP Gateway:                192.128.117.163

         Primary Domain Name Server:        0.0.0.0
         Secondary Domain Name Server:      0.0.0.0
         Domain Name:

         Receive RIP:                       Both
         Transmit RIP:                      v2 (multicast)
         Static Routes...

         Address Serving Setup...
         Exported Services...
         Filter Sets...